You for the
sake of the dust palliative and sacrifice lubrication?The
lubricant that don't be stained with the dust finally appears
The
dry type lubricates the powder
War in Persian gulf hour, the American solider
finds the traditional liquid lubricant on the contrary will
stick to attaching the sand dust and acceleration to wear
under many environment of the dustses!Particularly ising the
open type wheel gear, the glide type spare parts and ball
head joint are particularlymore difficult to attain the dust
palliative and lubricate.
Dry type introduced by our company's lubricating the powder
can effectively reduce the or so friction of 30%, and completely
don't be stained with the sand dust, can also use for the
revolution and miraculous lubricant Be locking the hole and
gliding to bolt of the lubrication is very valid!
The grain is very thin, so use the cotton
the stick even the daubery is rubbing each other of clean
superficial, then can effectively lubricate, use the convenience;Hot-resistant
amount to 800?The C is above, so use in the heavy burden lotus
to face up can also develop the effect, and characteristic
constant;This compared with the characteristic of the traditional
liquid lubricant"meet the heat to become sparse and don't
bear the heat high pressure" have the tremendous dissimilarity.
☆ phite powder material report
|
<
Price list >
| gage |
price |
300 目
(0.08467mm) |
300 dollars /kg
(more than 20 kilograms 150) |
2500 目
(0.01016mm) |
800 dollars /kg (more than 20 kilograms
320) |
2.0 micron
(0.002 mm) |
1,000 dollars/kg (more than 20 kilograms
320) |
2.7 micron
(0.0027 mm) |
800 dollars /kg (more than 20 kilograms
320) |
3.2 micron
( 0.00320mm) |
800 dollars /kg (more than 20 kilograms
320) |
| |
※Here the price is all for
don't tax price |
The technique data of the
graphite powder 300 eyes:
| Card
number |
Fixing
the carbon is no smaller than(%) |
The
ash powder is no bigger than (%) |
A
degree |
A
composition
(main is an ron) |
| HM-300 |
97 |
1.00 |
>300
目 |
<0.4
% |
This graphite powder mainly
is by grind to burn to knot the graphite piece to make into,
and it mainly constitutes to crystallize again the appearance
for the heat of the powder, up hasing the glide to face
in
the space, past oneself have from the smooth, and
because the structure is close,
can bear the heat to more than 800 degrees, after having
no the oxygen appearance ising hot-resistant canning up
to thousand, different from the carbon powderly being, it
having for oneself highly electrical conductivity, through
the heat heat pressing can model to various solid shape.
Its electrical conductivity depends on model for the operation
condition of solid hour, saying its resistance the value
can be small in 0.05 Europe cms with the general manufacturing
process.
[ Turn to Price
list]
＊The technique data of the
graphite powder 2500 eyes:
| Card
number |
Fixing
the carbon is no smaller than(%) |
The
ash powder is no
bigger than (%) |
The
water is no
bigger than (%) |
A
degree |
A
composition
(main is an ron) |
| HM-2500 |
99.3 |
0.6 |
0.5 |
>2500
eye |
<0.4
% |
This graphite powder is mainly the heat which
is turned to grind and become it to mainly constitute for
the powder directly and purely by the original mineral to
crystallize again appearance, hasing glide to face up in the
crystal space, past oneself have from the smooth, and because
the structure is close, can bear heat to 800 degrees above,
can model to various solid shape after having no oxygen appearance
hot-resistantly canning up to thousand, different from carbon
powderly being, it having Gao Dao3 Dian4 Xing4 for oneself,
through heat hotly pressing.Its electrical conductivity sees
to model for the solid of operation condition and certainly
say with the general manufacturing process its resistance
value can less than 0.01 cm in Europes.
[ Turn to Price
list]
＊The technique data
of the graphite powder 2.0 microns:
Fixed
carbon(%) |
Ash
(%) |
Volatile
Matter(%) |
Moisture
(%) |
粒度 |
90
% |
1.0
% |
- |
0.5
% |
2.0
micron(no small than 70%) |
This graphite powder
mainly is is directly and purely turned to grind by the original
mineral and become it mainly constitutes for the powder of
the heat crystallizes again the appearance, up hasing glide
to face in the space, past oneself have from the smooth, and
because the structure is close, can bear the heat to more
than 800 degrees, after having no the oxygen appearance ising
hot-resistant canning up to thousand, different from the carbon
powderly being, it having for oneself highly electrical conductivity,
through the heat heat pressing can model to various solid
shape. Its electrical conductivity depends on model for the
operation condition of solid hour, saying its resistance the
value can be small in 0.01 Europe cms with the general manufacturing
process.
[ Turn to Price
list]
＊The technique data
of the graphite powder 2.7 microns:
Fixed
carbon(%) |
Ash
(%) |
Volatile
Matter(%) |
Moisture
(%) |
粒度 |
93.02% |
5.03% |
1.95 |
0.30% |
2.7micron |
This graphite powder mainly
is is directly and purely turned to grind by the original
mineral and become it mainly constitutes for the 炭 powder
of the heat crystallizes again the appearance, up hasing
glide to face in the space, past oneself have from the smooth,
and because the structure is close, can bear the heat to
more than 800 degrees, after having no the oxygen appearance
ising hot-resistant canning up to thousand, different from
the carbon powderly being, it having for oneself highly
electrical conductivity, through the heat heat pressing
can model to various solid shape. Its electrical conductivity
depends on model for the operation condition of solid hour,
saying its resistance the value can be small in 0.01 Europe
cms with the general manufacturing process.
[ Turn to Price
list]
＊The technique data of the
graphite powder 3.2 microns:
| Fixed
carbon (%) |
Ash
(%) |
Volatile
Matter(%) |
Moisture(%) |
粒度 |
| 94.35 |
4.45 |
1.28 |
0.3 |
3.2
micron ( 7937eye ) |
This graphite powder mainly
is is directly and purely turned to grind by the original
mineral and become it mainly constitutes for the powder of
the heat crystallizes again the appearance, up hasing glide
to face in the space, past oneself have from the smooth, and
because the structure is close, can bear the heat to more
than 800 degrees, after having no the oxygen appearance ising
hot-resistant canning up to thousand, different from the carbon
powderly being, it having for oneself highly electrical conductivity,
through the heat heat pressing can model to various solid
shape.Its electrical conductivity depends on model for the
operation condition of solid hour, saying its resistance the
value can be small in 0.01 Europe cms with the general manufacturing
process.
|
Main
search
Chassis
