The standard installs the procedure(V2.0) ¡@
The gearing method of each series ¡@

1.Understanding the customer wants to improve which parts.
2.Open carriage and can support the high machine of the large crest of up the whole carses, open up good! Don't do any action first.
3.The measurement each tyre goes to the distance between an arches(record in table a)

Right and ex- round Left and ex- round Right back round Left back round
¡@ ¡@ ¡@ ¡@
¡@ ¡@ ¡@ ¡@

The good luck goes to of an arch to be apart from on the tyre(cm)
4.Plusing the sponge piece supports the carriage high.
5.Dismantle the tyre.
6.Descend to shake the arm mat up about the wood piece of the 30 cm thickness.

7.Taking the measurement rules measurement spring coil is apart from, considering to judge that car and pack where quantity where(regard the guest's need as principle), measure what size pack what size, in principle with put go in of biggest quantity rules for basis, the spring coil turn takes putting and doing not go in most the baby size as over more than four type of cars quasi-!

8.Take the measurement a measurement spring coil a path, a path choice principle for the size that the measurement pays if the 14 cms then needs to use the 150 mms(big and first-degree principle), defending the , the king assembles over later the openings can't is big in the 2 cms, the different size differently packed the method, please consult the web page

9.Taking should decide the size assemble in each spring coil, in principle, an indentation toward engine; Back an indentation toward the car head, the special condition does again the adjustment.

10. By the car bottom or any situation of[with] angle view and the spring coil coalescence that sees get the product, the principle is as follows:

<1>The openings of the top and bottom indentation can't is big in the 2 cs

2>With the cleft of the spring coil can't over 3 mms(0.3 cms), exceed to also indicate the thickness size too small, need to be used thick and first-degree.

11. Pack up the tyre, carry on the road to run the test, see how condition is, seeing whether have the different sound or other conditions, general automobile as long as the spring coil number is big in four turns will not have the noise, small in three turns spring coils the different sound condition is more currently, please match with with our company closely, will soon have the product to publish.

12. The measurement tyre re- goes to the distance of an arch, checking against with the table a data that stays, if have already supported superb lead 2 mm representative size assemble mistake(too thick), need to re- do to change.

13. Ask customer to fill in the form and list that the customer returns to the inside of the letter, tore topmost face to give customer, the two of underneath stay, one among those invite the style in our company an and enclose with to does the follow-up for our company to track the usage, such customer, square, can enjoy for two years, warranty(if have already filled in the insight and enclose with to love the car photograph)s, our company will send out the warranty card to that customer, completely diding not write and then without warranty.

14.Thank you to cooperate to create the double together to win with our company together, the good service can bring more customer and the business opportunities.

 

 
Chassis
Engine
Other
European
Asian



   
TEL : 886-3379-7183 ; 886-919-346775
FAX: 886-3378-9647